
Dirt Driver Tamper proof
The Tamperproof is housed in a strong lockable cabinet manufactured from either Zintec or Stainless Steel, and is automatically frost protected.
Heavy duty: Ideal for the local authorities, haulage, garages and utility companys where the exhaust gases can be directed outside. The 4 Position switch provides the user with Off, Cold, Hot, Hot & Chemical options.
Low level fuel and chemical switches will ensure the user that everything is ready and correct for the wash. The isolation switch gives you the control over the use of the pressure washer.
This machine can be supplied in varying pressures and volumes from the standard single phase 1500 psi at 12 litres per minute through to the Three Phase models i.e. 2200 at 15 LPM ; 2300 at 18 LPM or 3000 psi at 15 LPM- all available either manually or fully automatic token operated.
These machines are bespoke builds and with in reason most most fuctions and performance can be tailored to your needs.
As Standard
24v Switching for operator safety Thermostatically Controlled Heat Low Fuel Warning Low Water Warning Lockable control Panel door for anti-vandalism and total control by key holder Thermal overload protection Emergency stop button Hinged security locks Insulated chimney & rain cap
Optional extras
Stainless Steel Cabinet Stainless Steel Hose Reel 20 Metre Stainless Steel Hose Reel and Brush 20 Metre Flame Failure
Chimney Water Softener Remote Switch Token operated External double skinned fuel tanks
Specifications
|
Technical data
|
Dirt Driver 240volt
|
Dirt Driver 415 volt
|
|
Power Supply Ph/V/Hz
|
1/240/50
|
3/420/50
|
|
Water flow rate l/h
|
720
|
900
|
|
Pump Pressure bar/MPa
|
100/1500
|
200/2901
|
|
Temperature - normal °C
|
140
|
140
|
|
Connected load kW
|
3
|
5.5
|
|
Fuel consumption kg/h
|
4.9
|
6.9
|
|
Dims (LxWxH) mm
|
550 x 850 x 1650
|
550 x 850 x 1650
|
|
Weight kg
|
220
|
220
|
|