|
We supply the food industry with quality wash down supplies and systems. This photo below is an example of our foaming unit Suttner-5600
Suttner ST-5600 easy foam foamer unit How does it work ? These systems usually require hot water between 40-80 degrees to feed the pump which in turn supplies the easy foamer. The flow rate of the low pressure pumps are between 25- 50 litres per minute. The pressure is set to 30 bar. Depending on the amount satellite stations needed , the low pressure water will be pumped through a net work of stainless steel pipe to each area of the factory. This will ensure that you achieve the best cleaning action in the space. For the foaming effect, air is injected to each satellite station. A pressure drop in the line will allow the system to work like a venturi. The chemical is then injected with the air causing foam. To rinse the foam away, simply insert the correct lance and the station will work on normal pressure. These systems are suited to this environment as the volume of water combined with a pressure rinses the area without the aerosol effect. Keeping chemicals from atomising will give the customer better results and lower the chance of inhaling. Inlet 3/8 outlet 1/2 3-8 bar of air pressure and a flow rate of 30-50 LPM These are all bespoke requirements so we are unable to quote over the telephone. Please ring 01539 737753 for further details.
Nilfisk Alto |
