Flowjet Cleaning Equipment LTD offer more than just a range of standard cleaning equipment. We also make bespoke industrial cleaning equipment for specific cleaning applications. Flowjet offers repairs or maintenance of your pressure washer, whichever make or model. We work closely with Nilfisk, DTE, IPC & Dirt Driver and also Dema.

  • In Stock
  • Free Delivery On Orders over £200.00
  • Finance
    Basket Summary

    You have no items in your shopping cart.

    Quick view relevant section in catalogue
    Shop By
    Shopping Options Filter
    1. Foam Equipment & Accessories
    1. 1/4"F to 1/2"M
    2. M22 M to 1/4"F (40mm)
    Flow (Site Cleaning)
    1. 5 LPM
    2. 9 LPM
    3. 12 LPM
    4. 13 LPM
    5. 15 LPM
    6. 25 LPM
    7. 30 LPM
    8. 34 LPM
    9. 45 LPM
    10. 80 LPM
    11. 100 LPM
    12. 60 LPM
    13. 5.5 LPM
    14. 120 LPM
    Show Less Show More
    Temperature (Site Cleaning)
    1. 50
    2. 60
    3. 80
    4. 90
    5. 95
    6. 100
    7. 150

    Foam Equipment & Accessories

    Pressure washers can deliver snow-like foam that clings for a more extended period. To achieve this, you need a pressure washer that can deliver at a minimum of 10 LPM @ 20 Bar of working pressure.

    Your pressure washer lance & accessories need to be easily swapped, preferably using a quick release gun & lance.


    Foam Equipment & Accessories

    Foam is produced using an injector on the outlet of the pressure washer. When low pressure is activated, the venturi will create suction and in turn, will pick up the chemical. We can calculate the correct injector size according to your flow and pressure. We have a range of Suttner bypass injectors that accept compressed air. Typically the food industry uses this method to get the best cleaning results.

    Foam lance with a bottle

    The foaming agent gets injected at the end of the lance. The solution can run out quickly should you have a large area to clean. Available jet Orifice sizes 1.25-2.1 depending on flow and pressure. 1 litre - 2-litre bottle


    Foam lance with an air injector ST72 or ST75. This method will require a foam injector at the outlet of the pressure washer. A foam lance with a large nozzle has to be fitted to the pressure washer gun so that the line pressure is low enough for the chemical to be introduced. This is known as a venturi. This system is preferred among industrial & commercial customers. Ideally, hose length needs to be no more than 20m Hose bore 3/8 or more 10- 40 Lpm 20- 250 Bar


    • Low-Pressure Foam
    • Pressure Washer Foam Equipment
    • Food Standard Foam Equipment
    • Suttner Foam Units
    • Dema Foam Units